Injection Molding LLDPE DMDB8910 for Containers

Melt flow rate:

10 g/10min

Grade:Injection molding grade

Packing:25KG/Bags 

Brand:SINOPEC/ Sinopec Maoming Petrochemical Company


Data sheet

Product Details

Linear Low Density Polyethylene, abbreviated as LLDPE. Linear low-density polyethylene (LLDPE) is non-toxic, tasteless, odorless milky white particles with a density of 0.918~0.935g/cm3. Compared with LDPE, it has a higher softening temperature and melting temperature, and has the advantages of high strength, good toughness, high rigidity, heat resistance, and cold resistance. It also has good resistance to environmental stress cracking, impact strength, tear strength, etc., and is resistant to acids, alkalis, and organic solvents, and is widely used in industries, agriculture, medicine, hygiene, and daily necessities.

 

Physical property

Standard

Value

Unit

Melt Index

ASTM D1238

10

g/10min

Mechanical behavior

Standard

Value

Unit

Tensile Strength 23℃

ASTM D638

26

MPa

Tensile Strength 23℃

ASTM D638

14

MPa

Elongation 23℃

ASTM D638

180

%

Flexural Modulus 23℃

0

1100

MPa

Thermal

Unit

Standard

Value

Low Temperature Brittleness

ASTM D746

-70.0


Injection Molding LLDPE DMDB8910 for Containers

Linear Low Density Polyethylene, abbreviated as LLDPE. Linear low-density polyethylene (LLDPE) is non-toxic, tasteless, odorless milky white particles with a density of 0.918~0.935g/cm3. Compared with LDPE, it has a higher softening temperature and melting temperature, and has the advantages of high strength, good toughness, high rigidity, heat resistance, and cold resistance. It also has good resistance to environmental stress cracking, impact strength, tear strength, etc., and is resistant to acids, alkalis, and organic solvents, and is widely used in industries, agriculture, medicine, hygiene, and daily necessities.