HS code: 3902100090
Melt flow rate: 3~4 g/10min
Grade: Raffia grade
Packing:25 kg/bag
Brand: SINOPEC
Polypropylene is a tough, rigid and crystalline thermoplastic produced from propene (or propylene) monomer. It is a linear hydrocarbon resin. The chemical formula of polypropylene is (C3H6)n. PP is among the cheapest plastics available today.
Molecular Structure of Polypropylene
PP belongs to polyolefin family of polymers and is one of the top three widely used polymers today. Polypropylene has applications both as a plastic and a fiber in:
Automotive Industry
Industrial Applications
Consumer Goods, and
Furniture Market
It has the lowest density among commodity plastics.
Product name | polypropylene resin | Executive standard | Q/YSHJ202-2021 |
Mark | YHT30S | Consignee | Li |
Item | Control Indices |
Analysis Result |
Experimental Methods | ||||||
Superior quality | First grade | Qualified product | |||||||
Granular appearance | Black grain, pieces/kg | ≤ | 0 | 0 | 0 | 0 |
SH/T15416 | ||
Bigger and smaller Particles g/kg |
≤ | Code specified value | 1 | ||||||
Snakeskin grannules and tailing grannules pieces/kg | Code specified value | 0 | |||||||
Melt mass-flow rate (MFR) g/10min | 2.5-3. | 2.3-3.7 | 2.0-4.0 | 3.5 | GB/T36820 | ||||
Isotactic index, % | ≥ | 96 | 97.6 | GB/T2412 | |||||
Ash content( mass fraction), PPm | ≤ | 200 | 300 | 400 | 171 | GB/T9345.1 | |||
Tensile yield stress,MPa | ≥ | 33.8 | 29.4 | 28.5 | 34.0 | GB/T1040.2 | |||
Reference | 0.3mvn, pieces/1520cm2 ≤ | 3 | 5 | 8 | 5 |
GB/T6595 | |||
0.4mvn, pieces/1520cm2 ≤ | 15 | 25 | 40 | 16 | |||||
Results of evaluation | |||||||||
Polypropylene is a tough, rigid and crystalline thermoplastic produced from propene (or propylene) monomer. It is a linear hydrocarbon resin. The chemical formula of polypropylene is (C3H6)n. PP is among the cheapest plastics available today.
Molecular Structure of Polypropylene
PP belongs to polyolefin family of polymers and is one of the top three widely used polymers today. Polypropylene has applications both as a plastic and a fiber in:
Automotive Industry
Industrial Applications
Consumer Goods, and
Furniture Market
It has the lowest density among commodity plastics.