HS code:
3902100090
Melt flow rate:
39± g/10min
Grade:
Fiber level /Injection molding
Packing:
25 kg/bag
Brand:
SINOPEC
Prospects and market demand of Y35X
PH-Y35X has a good reputation and market in central China, meet the quality requirements of similar products of foreign companies, through the United States, Japan, South Korea, and the European Union, and other countries and regions of environmental health certification, PPH-Y35X does not contain plasticizer, organic tin, green environmental protection, with high orientation, low ash, high strength, spinnability, and other characteristics, Fill the gap in the domestic high-end non-woven application field, widely used in disposable operating clothes, absorbable sutures, diapers, female hygiene products, and other products production. The product has formed a mature production process, favored by downstream customers, broad market prospects.
Y35X same grade of raw materials and uses
Polypropylene medical infusion packaging materials B4902, B4908, high permeability polypropylene K4912, K4912R for syringes, and high flow polypropylene K4818, K4925, terpolymer polypropylene F5606Y, F5806Y, and other medical products. These products are widely used in the production of infusion bottles, infusion bags, syringes, medicine bottles, and other medical supplies.
Yanshan petrochemical polypropylene B4908 and B4902 series products are developed for LVP. The series of products have different melt mass flow rates (MFR), which can meet the needs of various process routes for the production of infusion packaging. The product meets the requirements of pharmacological testing, is safe and non-toxic, suitable for long-term storage. With the increase of storage time, the number of particles in the solution does not change, and will not have adverse effects on the human body. The product also has the advantages of good heat resistance, high transparency, suitable fluidity, and high rigidity.
PP Shanghai SECco S2040 melt-blown fabric. Shanghai SECco S2040 melt-blown fabric non-woven fabric. Application scope: polypropylene injection molding products, a large amount of general daily necessities are made of polypropylene, common products: Basin, bucket, furniture, film, woven bag, bottle cap, car bumper, TV, radio shell, electrical insulation material, anticorrosive pipe, plate, storage tank, flat wire, fiber, packaging film, air duct, washing machine frame and cover, refrigerator door liner, lawnmower, sprinkler.
Sinopec Luoyang Branch Product Quality Certificate
Product name: polypropylene resin Model No.: PPH-Y35X
| |||
Item | Standard Value | Results | Test Methods |
Melt mass-flow velocity of solution | 30.0 ~44.0 | 39.4 | GB/T 3682. 1-2018 |
Isotactic index, % | ≥95.0~99.0 | 98.3 | GB/T 2412-2008 |
Granular appearance: | 0 | 0 | SH/T 1541. 1-2019 |
≤5 | 0 | ||
report | 30 | ||
≤100 | 17.2 | ||
Ash content (mass fraction), mg/kg | ≤0.030 | 0.014 | GB/T 9345. 1-2008 |
Tensile properties Tensile fracture nominal strain (εtB），%
Tensile Fracture stress (MPa)
Tensile elastic modulus (MPa) | ≥200 | 450 | GB/T 1040. 2-2006 |
＞29.8 | 34.5 | ||
＞8.0 | 20.4 | ||
≥800 | 1470 | ||
Fisheye： Fisheye（≥0.8mm），pc / 1520cm2 Fisheye (0.4~0.8mm), pc / 1520cm2 | ＜10 | 0 | GB/T 6595-1986 |
＜40 | 1 | ||
The following is blank | |||
Prospects and market demand of Y35X
PH-Y35X has a good reputation and market in central China, meet the quality requirements of similar products of foreign companies, through the United States, Japan, South Korea, and the European Union, and other countries and regions of environmental health certification, PPH-Y35X does not contain plasticizer, organic tin, green environmental protection, with high orientation, low ash, high strength, spinnability, and other characteristics, Fill the gap in the domestic high-end non-woven application field, widely used in disposable operating clothes, absorbable sutures, diapers, female hygiene products, and other products production. The product has formed a mature production process, favored by downstream customers, broad market prospects.
Y35X same grade of raw materials and uses
Polypropylene medical infusion packaging materials B4902, B4908, high permeability polypropylene K4912, K4912R for syringes, and high flow polypropylene K4818, K4925, terpolymer polypropylene F5606Y, F5806Y, and other medical products. These products are widely used in the production of infusion bottles, infusion bags, syringes, medicine bottles, and other medical supplies.
Yanshan petrochemical polypropylene B4908 and B4902 series products are developed for LVP. The series of products have different melt mass flow rates (MFR), which can meet the needs of various process routes for the production of infusion packaging. The product meets the requirements of pharmacological testing, is safe and non-toxic, suitable for long-term storage. With the increase of storage time, the number of particles in the solution does not change, and will not have adverse effects on the human body. The product also has the advantages of good heat resistance, high transparency, suitable fluidity, and high rigidity.
PP Shanghai SECco S2040 melt-blown fabric. Shanghai SECco S2040 melt-blown fabric non-woven fabric. Application scope: polypropylene injection molding products, a large amount of general daily necessities are made of polypropylene, common products: Basin, bucket, furniture, film, woven bag, bottle cap, car bumper, TV, radio shell, electrical insulation material, anticorrosive pipe, plate, storage tank, flat wire, fiber, packaging film, air duct, washing machine frame and cover, refrigerator door liner, lawnmower, sprinkler.