News

polypropylene was modified to become At present, plastic processing is the most active area of development and has achieved the most fruitful results.……

Polypropylene is odorless, tasteless and non-toxic. It is the lightest among commonly used resins……

Polypropylene (PP) is a thermoplastic resin and one of the five general-purpose resins.……

Commonly used raw materials for thin-wall injection molding include: polypropylene (PP), polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS), PC/ABS blends and PA6, etc.……

Polypropylene PP is a polymer made from propylene as a monomer. Plastics with polypropylene PP as the base material are called polypropylene PP plastics.……

Thermoplastic elastomers are an important part of elastomers. Common thermoplastic elastomers include the following categories: styrene thermoplastic elastomers, polyurethane thermoplastic elastomers, polyolefin thermoplastic elastomers, and polyamide thermoplastic elastomers.……

Compared with other modified plastics, modified PET engineering plastics have the advantages of heat resistance, good mechanical properties, and high cost performance.……

PE is a crystalline raw material, very little hygroscopicity,PE molecular chain flexibility is good, the interbond force is small, the melt viscosity is low, the fluidity is excellent,PE shrinkage rate range is large, the shrinkage value is large, and the directivity is obvious.……

The comparison between HDPE, LDPE, and LLDPE, and various ways to distinguish them， namely burn method, sensory detecting method.……

Polyethylene terephthalate plastics, mainly including polyethylene terephthalate (PET) and polybutylene terephthalate (PBT). ……