• Tel: +86 13643875845  / +86 13526966205   
  • |    E-mail: sales@polypvc.com
  • Categories
    Linear low density polyethylene film grade - F181
    • Linear low density polyethylene film grade - F181
    • Linear low density polyethylene film grade - F181
    • Linear low density polyethylene film grade - F181

    Linear low density polyethylene film grade - F181

    LLDPE film grade can be used to make films such as agricultural film and mulching film, packaging bags of daily use.

    HS Code:3902100090

    Melt Flow Rate:1.11

    Grade:Film grade

    Packing:25kg/bag

    Sinopec:

    Brand

    What is the film grade of Linear low density polyethylene ?

    Sinopec LLDPE film grade is white, nontoxic, tasteless and odorless, supplied in pellets. It has high tensile strength, toughness and rigidity and is resistant to heat and cold. It has good environmental stress crack resistance and impact and puncture resistance and has good processability. Films made from it have excellent transparence and good aging resistance, acids, alkali and organic solvents.

    Application of the product

    LLDPE film grade can be used to make films such as agricultural film and mulching film, packaging bags of daily use, garbage bags, container lining, coatings and agricultural small-caliber drainage pipes. 


    Hot Tags: Linear low density polyethylene film grade - F181, manufacturers, suppliers, factory, Customized

    Sinopec Yangzi Petrochemical Co., Ltd.

    Product quality certificate

    Product name: Linear Low Density Polyethylene                            Sampling locations: 2PE-D8014

    Product grade: PE-L  F181                                                  Sampling time: 2021-06-12

    Product number: YPE41612J1                                                                Issue date:2022-06-14

    Implementation standardQ/SH3060 007-2020                            Sample number: 3101468

    Record     number

    Limits

    Results

    Test Methods

    Granular appearance

    Black grain, g/kg; 

    black spot; g/kg; 

    Big grains and small grains,g/kg;

      

    Color grains and black spot; g/kg;

    Snakeskin grains and tail grains; g/kg;

     0

     

     

     

                                          0

    SH/T 1541.1-2019

    Report

    1

     10

    0

     10

    0

     20

    10

    Density,g/cm3

    0.9150~0.9210

    0.9190

    GB/T 1033.2-2010

    Molten mass flow rate (MFR),

     

    0.70~1.30

    1.11

    GB/T 3682.1-2018

    Tensile stress at yield,MPa

    8.00

    10.1

    GB/T 1040.2-2006

    Tensile nominal strain at break,MPa

    250

    570

    GB/T 1040.2-2006

    Fisheye(0.8mm),个/1520cm²

     

    8.00

    7.0

    GB/T  6595-1986

    fisheye(0.4mm~0.8mm),个/1520cm²

    40.0

    13.7

    GB/T  6595-1986

    impact damage quality,g

    50

    66

    GB/T 9639.1-2008

    Haze, %

    report

    15.8

    GB /T 2410-2008


    Related Industry Products
    • Polyethylene process can be injection molding, extrusion, blow molding and other processing methods.
    • Polyethylene or polythene (abbreviated PE; IUPAC name polyethene or poly(methylene)) is the most common plastic in use today.It is a polymer, primarily used for packaging (plastic bags, plastic films, geomembranes and containers including bottles, etc.). As of 2017, over 100 million tonnes of polyethylene resins are being produced annually, accounting for 34% of the total plastics market.
    • HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion.
    • EVA can be processed by many different methods, such as injection molding, extrusion molding, blow molding, calendering and foaming.

    Quote for the Latest Price

    Ask a quote for the latest price and one of our team members will respond as soon as possible. Fields marked with * are required.


    • POLYPVC
    • POLYPVC is a one stop plastic and chemical supplier with rich experiences in providing PP, PE, PVC, EVA, ABS raw materials, bulk bag and PP woven fabrics.
    • Mobile Site:https://www.polypvc.com/mobile/