PP woven fabrics for pp bags

Use of container bags

(1) loading. First, the lifting ring of the container bag is symmetrically hung on the beam of the filling machine, so that the bottom of the container bag basically contacts the ground. Then, the filling port of the container bag is opened, and the container is put into the filling barrel and clamped by the clamping device, so as to avoid the leakage of dust or particles. Start the filling machine to load the raw material into the bag from the filling port, and straighten the bag before filling. After filling, close the filling port. If the container bag with discharge port is used, check whether the bottom is tied properly before filling.

(2) loading. The lifting ring of container bags can be hung on the lifting device in a balanced way. Forklift, crane, crane, etc., can be selected according to the type and loading weight of container bags. If forklift is used to lift the container bags, the shovel plate should be adjusted to the appropriate position, the container bags should be close to the forklift, do not lean forward. In order to ensure the balance of the center of gravity of the bag body when lifting, pay attention to not hanging a single ring. Then, start the lifting device to slowly lift the container bag, reach a certain height, evenly flat on the train (or car) platform. If it is not necessary to be immediately loaded and carried away, it should be piled up neatly in the work site. In the process of lifting and stacking, do not squeeze each other, tilt, collision, etc.

(3) storage. Principle of honshui bagging after loading the material, should install namely namely, but if need because of the situation, don't carry away immediately, to avoid material damage, bags should be stored in warehouse, surrounding environment should be far away from the water, steam, wet and heat source, such as outdoor storage, in addition to meet the above conditions, also should pay attention to using tarpaulin cover, and avoid direct sunlight.

(4) discharge. Lift the container bag with a forklift or crane, align it with the mouth of the material trough or other containers, open the rope of the material mouth at the bottom of the bag body, and the raw materials can fall down by themselves to complete unloading. For disposable container bags, a suitable tool can be used to break the bottom of the bag at a distance to discharge. Do not stand under container bags during lifting and unloading operations.