• Tel: +86 13643875845  / +86 13526966205   
  • |    E-mail: sales@polypvc.com
  • Categories
    Products

    POLYPVC is a professional plastic material supplier providing high-quality materials, including PP, PE, PVC, EVA, ABS, and also supplies bulk bag, woven fabric.

    • HDPE-HD5502TA Blowing molding
      Thermoplastic resin extrusion or injection molding of the tubular plastic billet, while hot (or heated to soften the state), placed in the split mold, closed immediately after the billet into the compressed air, the plastic billet blowing and close to the inner wall of the mold, ...
    • High density polyethylene 5502
      HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigid...
    • Polypropylene -EP533N Injection molding grade
      PP contains no polar groups and has excellent electrical insulation properties. Its water absorption rate is less than 0.01%. PP is a semi-crystalline polymer with good chemical stability. It is stable to most chemical except strong oxidizers. Inorganic acid, alkali and salt solu...
    • PPH-1100N Injection molding grade
      Sinopec PP homopolymer has higher crystallinity, high rigidity, high tensile strength, high modulus and good thermal distortion resistance. Products made from this resin are characterized by short processing time, good scratching resistance and fluidity.
    • High impact polystyrene-HIEM
      Polystyrene (PS) , is a synthetic resin made byhomopolymerization of styrene monomers or with other comonomers. In the molecular structure of homopolymer, the main chain is a saturated carbon chain with benzene rings as the lateral group. The resin is a non-crystalline linear pol...
    • General-purpose polystyrene-500NT
      General-purpose polystyrene is a thermoplastic resin, colorless, odorless, tasteless and shiny, transparent beads or granular solid. Density 1.04 ~ 1.09, transparency 88% ~ 92%, refractive index 1.59 ~ 1.60. The melting temperature of the product is 150 ~ 180℃, the thermal decomp...
    • High density polyethylene-GC 7260
      Sinopec HDPE injection molding grade has good balance of rigidity and toughness, good impact resistance and excellent of low temperatures resistance and good environmental stress crack resistanse. The resin has good rigidity and abrasion resistance, and
    • HDPE film grade - DGDX 6095
      Sinopec HDPE film grade has excellent physical properties, good processability, high mechanical strength and good stainability, printability and sealability. The resin is resistant to moisture, oil and chemical corrosion and has excellent high-speed processing Properties.

    Quote for the Latest Price

    Ask a quote for the latest price and one of our team members will respond as soon as possible. Fields marked with * are required.


    • POLYPVC
    • POLYPVC is a one stop plastic and chemical supplier with rich experiences in providing PP, PE, PVC, EVA, ABS raw materials, bulk bag and PP woven fabrics.
    • Mobile Site:https://www.polypvc.com/mobile/