• Tel: +86 13643875845  /  +86 13526966205  
  • |    E-mail: sales@polypvc.com
  • Categories
    Auto parts injection moldding grade polypropylene materials
    • Auto parts injection moldding grade polypropylene materials
    • Auto parts injection moldding grade polypropylene materials
    • Auto parts injection moldding grade polypropylene materials
    • Auto parts injection moldding grade polypropylene materials

    Auto parts injection moldding grade polypropylene materials

    HS Code:3902100090

    Color:Transparent/Translucent/Opaque

    Melt flow rate or Melt flow index:28

    CAS:9002-88-4

    Packing:25KG/Bag


    The Advantages of Natural Polypropylene for Automotive Manufacturing

    The following qualities of natural polypropylene also make it excellent to use in automotive manufacturing.

    PP’s a Bad Conductor

    Polypropylene is classified as an insulator, making it suitable for manufacturing electronic components such as capacitors and audio equipment. Studies show that one in five drivers, plan to purchase a purely electric car within the next five years. As such, the automotive industry is looking to embrace broader electrical applications – and PP could well be the answer.

    PP Boasts a High Melting Point and is Highly Malleable

    The plastic has a high melting point (130 degrees celsius) and, when melted, is highly malleable. This makes polypropylene safer to use around heat than some other materials. Additionally, it melts into a liquid that can then be molded into any desired shape. Therefore, reheating after cooling without significant degradation, making this material incredibly versatile.

    High Tensile Strength

    Polypropylene can withstand up to 4800 psi, making it suitable for applications involving heavy loads or rugged use.

    You Can Transform Polypropylene Into Fiber Form

    Therefore, allowing the creation of mesh-like surfaces that can be used in car interiors.

    Polypropylene is a Low-Density Material

    As such, it significantly reduces costs and fuel consumption associated with more substantial vehicles. Manufacturers can, therefore, use PP to decrease a car’s weight, making them more environmentally and economically appealing.

    The Future of Automotive Manufacturing Lies in High-Quality Plastics

    With the plastic market on the rise, it’s no surprise versatile materials like natural polypropylene are on the up. The future sees an increased demand for more lightweight, environmentally friendly cars, so manufacturers should look towards using PP to reduce the weight of their vehicles.


    Hot Tags: Auto parts injection moldding grade polypropylene materials, manufacturers, suppliers, factory, Customized

    Specifications & Applications

    Grade:

    Other

    visual inspection

    Translucence

    Application:

    Washing machine parts, auto parts,

    home appliance housings

    Notes:

    Processing conditions: Other

    Technical parameters:

    Items:

    Test conditions (Statues)

    Test method

    Standard

    Units

    Physical performance

    Melting flow index

    2.16Kg

    Q/SY DS0513

    28.3

    g/10min

    tensile yield stress


    Q/SY DS 0515

    22.6

    MPa

    flexural modulus


    Q/SY DS 0515

    18

    GPa

    Mechanical Properties

    Izod impact strength  

    23

    Q/SY DS 0517

    19

    J/m

    Izod impact strength

    -20

    Q/SY DS 0517

    287

    J/m

    Big grains and small grains


    SH/T 1541

    2.0

    g/Kg

    yellow index


    Q/SY DS 0514

    3.8


    ash content

    GB/T 93456

    GB/T 9345

    0.031

    %


    Related Industry Products
    • HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion.
    • Thermoplastic matrix polymer composites have gained commercial success in the semistructural and structural applications. Polyethylene (PE) is one of the most versatile and widely used thermoplastics in the world because of its excellent properties like toughness, near-zero moisture absorption, excellent chemical inertness, low coefficient of friction, ease of processing and unusual electrical properties.
    • Polyethylene is by far the most common type of consumer plastic, and is used in many everyday materials. It is a thermoplastic product, meaning that it can be melted into a liquid and then cooled back into a solid, many times over. Different processing conditions give rise to different grades of polyethylene that can be used for very different purposes—from flexible cling wrap on the one end of the spectrum, to hard bollard post covers on the other.
    • HDPE injection molding grade has good balance of rigidity and toughness, good impact resistance and excellent of low temperatures resistance and good environmental stress crack resistanse. The resin has good rigidity and abrasion resistance, and good processability.

    Quote for the Latest Price

    Ask a quote for the latest price and one of our team members will respond as soon as possible. Fields marked with * are required.


    • POLYPVC
    • POLYPVC is a one stop plastic and chemical supplier with rich experiences in providing PP, PE, PVC, EVA, ABS raw materials, bulk bag and PP woven fabrics.
    • Mobile Site:https://www.polypvc.com/mobile/