• Tel: +86 13643875845  / +86 13526966205   
  • |    E-mail: sales@polypvc.com
  • Categories
    Linear low density polyethylene film - 7042
    • Linear low density polyethylene film - 7042
    • Linear low density polyethylene film - 7042
    • Linear low density polyethylene film - 7042

    Linear low density polyethylene film - 7042

    LLDPE film grade can be used to make films such as agricultural film and mulching film, packaging bags of daily use.

    HS Code:3902100090

    Melt Flow Rate:2.0

    Grade:Film grade

    Packing:25kg/bag

    Sinopec:

    Brand

    What is Linear low density polyethylene film?

    Sinopec LLDPE film grade is white, nontoxic, tasteless and odorless, supplied in pellets. It has high tensile strength, toughness and rigidity and is resistant to heat and cold. It has good environmental stress crack resistance and impact and puncture resistance and has good processability. Films made from it have excellent transparence and good aging resistance, acids, alkali and organic solvents.

    Application of the product

    LLDPE film grade can be used to make films such as agricultural film and mulching film, packaging bags of daily use, garbage bags, container lining, coatings and agricultural small-caliber drainage pipes. 


    Hot Tags: Linear low density polyethylene film - 7042, manufacturers, suppliers, factory, Customized

    Shenhua Ningxia Coal Industry Group Coal-to-Liquid Chemical Quality Inspection and Measurement Center                                                 Product quality certificate


    Product name: Polyethylene resin                                                                Test time:2017-12-09                                        Product grade: DFDA-7042                                                                            Production time: 2017-12-08                        Product number: DFDA-7042201712081                                        Sample number: XIPEDFDA -70422017120811002

    Implementation standardQ/DQ SHM 0010-2017    


    Record     number

    Limits

    Results

    Test Methods

    Granular appearance

    Color grains, g/kg; 

     


    Snakeskin grains and tail grains; g/kg;

     


    Big grains and small grainsg/kg;

       

     20

     

     

     

                       0

    SH/T 1541-2006

     40

    4

     10

    0

    Density,g/cm3

    0.917~0.923

    0.920

    GB/T 1033.1-2008

    Molten mass flow rate (MFR),

     

    1.5~2.5

    2.0

    GB/T 3682-2000

    Tensile stress at yield,MPa

    8.00

    11.3

    GB/T 1040.2-2006

    tensile stress at break,MPa

    12.5

    14.6

    GB/T 1040.2-2006

    Tensile nominal strain at break,MPa

    300

    460

    GB/T 1040.2-2006

    Haze, %

    30.0

    22.6

    GB /T 2410-2008

    Fisheye 0.8mm,a/1520cm²

     

    8

    0

    GB/T  6595-1986

    Fisheye 0.4mm,a/1520cm²

    30

    2

    GB/T  6595-1986


    Related Industry Products
    • Polyethylene process can be injection molding, extrusion, blow molding and other processing methods.
    • Polyethylene or polythene (abbreviated PE; IUPAC name polyethene or poly(methylene)) is the most common plastic in use today.It is a polymer, primarily used for packaging (plastic bags, plastic films, geomembranes and containers including bottles, etc.). As of 2017, over 100 million tonnes of polyethylene resins are being produced annually, accounting for 34% of the total plastics market.
    • HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion.
    • EVA can be processed by many different methods, such as injection molding, extrusion molding, blow molding, calendering and foaming.

    Quote for the Latest Price

    Ask a quote for the latest price and one of our team members will respond as soon as possible. Fields marked with * are required.


    • POLYPVC
    • POLYPVC is a one stop plastic and chemical supplier with rich experiences in providing PP, PE, PVC, EVA, ABS raw materials, bulk bag and PP woven fabrics.
    • Mobile Site:https://www.polypvc.com/mobile/