• Tel: +86 13643875845  / +86 13526966205   
  • |    E-mail: sales@polypvc.com
  • Categories
    Polypropylene injection molding grade-Random copolymer M800E
    • Polypropylene injection molding grade-Random copolymer M800E
    • Polypropylene injection molding grade-Random copolymer M800E
    • Polypropylene injection molding grade-Random copolymer M800E

    Polypropylene injection molding grade-Random copolymer M800E

    Sinopec PP random copolymer is a copolymer resulting from the random distribution of ethylene in propylene chain segment.

    HS code:3902100090

    Melt flow rate:8.00±2.00 g/10min

    Grade:Injection molding grade

    Packing:25 kg/bag

    Brand:SINOPEC

    What is the Polypropylene Random Copolymer?

    Sinopec PP random copolymer is a copolymer resulting from the random distribution of ethylene in propylene chain segment. The resin has good transparence, glossiness, heat resistance and processability.

    Application of the product

    PP random copolymer is widely used in the production of medical appliances with high transparence, such as medical syringes, medical infusion bottles,medical centrifuge tubes and sample tubes. It is used in the production of food containers, stationery, packaging materials and houseware. 


    Hot Tags: Polypropylene injection molding grade-Random copolymer M800E, manufacturers, suppliers, factory, Customized

     Sinopec Shanghai Petrochemical Co., Ltd.

    Product quality certificate



    Product name: Polypropylene resin                                                   Sampling locations: Finished Mixing Tank

    Product grade: PPR-MT08(M800E)                                           Sampling time: 2022-05-23

    Product number:SPS62523E1                                                               Issue date:2022-05-24                                     Implementation standardQ/310116000116C024-2020-1          GSHSH-R-ZG-ZL-038-2018


    Record     number

    Limits

    Results

    Test Methods

    Granular appearance

    Black grain, g/kg; 

       black spot; g/kg; 

    Big grains and small grains,g/kg;

      

     0

     

     

     

                                          0

    SH/T 1541.1-2019

    Report

    0

     80

    1

    Molten mass flow rate (MFR),

     

    8.00± 2.00

    7.80

    GB/T 3682.1-2018

    Tensile stress at yield,MPa

    >20.0

    27.4

    GB/T 1040.2-2006

    Simply supported beam notched impact strength;kJ / m ²;

    >2.8

    8.1

    GB/T 1043.1-2008

    Flexural modulus,Mpa

    >800

     1.07E+03

    GB /T 9341-2008

    load deformation temperature,℃

    >60

    71

    GB /T 1634.2-2019

    Ash score

    ≤0.050

    0.024

    GB /T 9345.1-2008

    Transmittance;%

     

    75

    93.1

    GB /T 2410-2008

    Haze;%

     

    report

    0.4

    GB /T 2410-2008

    yellow index

    2.0

    -3.4

    HG/T 3862-2006

    Fisheye(0.8mm),个/1520cm²

    fisheye(0.4mm),个/1520cm²

    report

    0

    GB /T 6595-1986

    report

    0

    Mold shrinkage (SM):

    Parallel:

     

    Vertical:

    report

    1.0

    GB /T 17037.4-2003

    report

    1.1


    Related Industry Products
    • With increasing concerns about the economy and environment, lighter weight materials in the automotive industry have become a priority.
    • The high-end polypropylene resin PPH-Y35X developed by Luoyang Petrochemical has replaced foreign brands and is the first Chinese product approved by the European Union Nonwovens Association. After more than two years of operation, the technology of the product has been relatively mature, the use of diapers, wet wipes, masks, sanitary napkins and other medical and health supplies.
    • It has high heat deformation temperature(HDT), good scratching resistance, good impact resistance at low temperature, good rigid-tough balance and good fluidity. Products made from this resin are characterized by fast processing and excellent processability.
    • PP contains no polar groups and has excellent electrical insulation properties. Its water absorption rate is less than 0.01%. PP is a semi-crystalline polymer with good chemical stability. It is stable to most chemical except strong oxidizers. Inorganic acid, alkali and salt solutions have almost no damaging effect on PP.PP has good heat resistance and low density.

    Quote for the Latest Price

    Ask a quote for the latest price and one of our team members will respond as soon as possible. Fields marked with * are required.


    • POLYPVC
    • POLYPVC is a one stop plastic and chemical supplier with rich experiences in providing PP, PE, PVC, EVA, ABS raw materials, bulk bag and PP woven fabrics.
    • Mobile Site:https://www.polypvc.com/mobile/