• Tel: +86 13643875845  / +86 13526966205   
  • |    E-mail: sales@polypvc.com
    • Home > Products
    Categories

    Hot Products

    Hot News

    Products

    POLYPVC is a professional plastic material supplier providing high-quality materials, including PP, PE, PVC, EVA, ABS, and also supplies bulk bag, woven fabric.

    • LLDPE-7042 MFR2 Film grade
      LLDPE-7042 MFR2 Film grade
      LLDPE7042 is a film grade low density polyethylene for the production of various films,The production process includes oil chemical industry and coal chemical industry
      Send InquiryLearn more
    • High density polyethylene 2911
      High density polyethylene 2911
      HDPE injection molding grade has good balance of rigidity and toughness, good impact resistance and excellent of low temperatures resistance and good environmental stress crack resistanse. The resin has good rigidity and abrasion resistance, and good processability.
      Send InquiryLearn more
    • HDPE-HD5502TA Blowing molding
      HDPE-HD5502TA Blowing molding
      Thermoplastic resin extrusion or injection molding of the tubular plastic billet, while hot (or heated to soften the state), placed in the split mold, closed immediately after the billet into the compressed air, the plastic billet blowing and close to the inner wall of the mold, ...
      Send InquiryLearn more
    • High density polyethylene 5502
      High density polyethylene 5502
      HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigid...
      Send InquiryLearn more
    • Polypropylene -EP533N Injection molding grade
      Polypropylene -EP533N Injection molding grade
      PP contains no polar groups and has excellent electrical insulation properties. Its water absorption rate is less than 0.01%. PP is a semi-crystalline polymer with good chemical stability. It is stable to most chemical except strong oxidizers. Inorganic acid, alkali and salt solu...
      Send InquiryLearn more
    • PPH-1100N Injection molding grade
      PPH-1100N Injection molding grade
      Sinopec PP homopolymer has higher crystallinity, high rigidity, high tensile strength, high modulus and good thermal distortion resistance. Products made from this resin are characterized by short processing time, good scratching resistance and fluidity.
      Send InquiryLearn more
    • PC 1750 for Automotive Parts
      PC 1750 for Automotive Parts
      PC 1750 is a general-purpose polycarbonate resin that is designed to offer excellent mechanical properties, processability, and thermal stability.
      Send InquiryLearn more
    • High impact polystyrene-HIEM
      High impact polystyrene-HIEM
      Polystyrene (PS) , is a synthetic resin made byhomopolymerization of styrene monomers or with other comonomers. In the molecular structure of homopolymer, the main chain is a saturated carbon chain with benzene rings as the lateral group. The resin is a non-crystalline linear pol...
      Send InquiryLearn more
    • POLYPVC
    • POLYPVC is a one stop plastic and chemical supplier with rich experiences in providing PP, PE, PVC, EVA, ABS raw materials, bulk bag and PP woven fabrics.
    • Get In Touch
    • Luoyang Dema Import & Export Co., Ltd.
    • Telephone:
      +86 13643875845;
      +86 13526966205;
    • Address:
      6th floor, building 1, Tianyuan Middle Free Trade Port Luoyang, Henan Province, China.
    • Email:
      sales@polypvc.com
    • Mobile Site:https://www.polypvc.com/mobile/
    Copyright © 2021 Luoyang Dema Import & Export Co., Ltd. All Rights Reserved